Ultrasonic Guided Waves in Structural Health Monitoring

[4] Rose, J.L., 2002, Standing on the Shoulders of Giants - An Example of Guided Wave Inspection, Mehl Honor Lecture, Materials Evaluation, 60, pp.53-59.

Google Scholar

[5] Rose, J.L., 2002, A Baseline and Vision of Ultrasonic Guided Wave Inspection Potential, Transactions of the ASME, Journal of Pressure Vessel Technology, 124, pp.273-282.

DOI: 10.1115/1.1491272

Google Scholar

[6] Hayashi, T. and Rose, J.L., 2003, Guided Wave Simulation and Visualization by a Semi-Analytical Finite Element Method, Materials Evaluation, 60, pp.75-79.

Google Scholar

[7] Rose, J.L., Pelts, S.P., Quarry, M.J., 1998, A Comb Transducer Model for Guided Wave NDE, Ultrasonics, 36, pp.163-169.

DOI: 10.1016/s0041-624x(97)00042-5

Google Scholar

[8] Rose, J.L., Soley, L.E., 2000, Ultrasonic guided waves for anomaly detection in aircraft components, Materials Evaluation, 50, pp.1080-1086.

Google Scholar

[9] Hongerholt, D.D., Willms, G., Rose, J.L., 2002, Summary of Results from an Ultrasonic In-Flight Wing Ice Detection System, Review of Progress in Quantitative Nondestructive Evaluation, 21, pp.1023-1028.

DOI: 10.1063/1.1472908

Google Scholar

[10] Rose, J.L., Zhu, W., Zaidi, M., 1998, Ultrasonic NDT of Titanium Diffusion Bonding with Guided Waves, Materials Evaluation, 56, pp.535-539.

Google Scholar

[11] Rose, J.L., Hay, T.R., Agarwala, V., Stephenson, J.E., A Leave-in-place Sensor for Damage Detection in an SH-60 Helicopter Transmission Beam, 2001 USAF Aircraft Structural Integrity Program Conference, Williamsburg, VA, 10-13 December (2001).

Google Scholar

[12] Rose, J.L., Hay, T., Agarwala, V.S., Skin to Honeycomb Core Delamination Detection with Guided Waves, Fourth Joint DoD/FAA/NASA Conference on Aging Aircraft, CD Session Composites Debond/Disbond, pp.36-47, St. Louis, MO, May 15-18 (2000).

Google Scholar

[13] Song, W. -J., Rose, J.L., Whitesel, H., 2003, An Ultrasonic Guided Wave Technique for Damage Testing in a Ship Hull, Materials Evaluation, 60, pp.94-98.

Google Scholar

[14] Nagy, P.B. and Kent, R.M., 1995, Ultrasonic Assessment of Poisson's Ratio in Thin Rods, JASA, 98, pp.2694-2701.

Google Scholar

[15] Kwun, H., and Teller, C.M., 1994, Detection of fractured wires in steel cables using magnetostrictive sensors, Materials Evaluation, 52, pp.503-507.

Google Scholar

[16] Rose, J.L., Morris, C., Spurlock, K., Schupp, J., 2002, Ultrasonic Sensor System for Calcium Fluoride Crystal Manufacture, presented at the Third International Symposium on 157 nm Lithography, Antwerp, Belgium, September 3-6, (2002).

Google Scholar

[17] Energy Based Products for Endoscopic Surgery from Ethicon Endo-Surgery, Ethicon-Endo Surgery, Inc., Retrieved September 29, 2003 from the World Wide Web: http: /www. ethiconendo. com/ultrasonic. jsp.

DOI: 10.26616/nioshheta200301112909

Google Scholar

[18] Rose, J.L., Ultrasonic Inspection of Adhesive Bonds (Chapter 18), Adhesion Science and Engineering: The Mechanics of Adhesion, Vol. 1, D.A. Dillard and A.V. Pocius, eds., pp.699-724, (2002).

DOI: 10.1016/b978-0-444-51140-9.50045-7

Google Scholar

[19] Rose, J.L., Sun, Z., Zaidi, M., 2003, A Phased Array Guided Wave Approach to Adhesive Bonding Structural Integrity Analysis, Materials Evaluation, 61, pp.941-946.

Google Scholar

[20] Song, W. -J., Rose, J.L., Galan, J.M., Abascal, R., 2003, Ultrasonic Guided Wave Scattering in a Plate Overlap, to be published in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control.

DOI: 10.1109/tuffc.2005.1503975

Google Scholar

[21] Li, J. and Rose, J.L., 2001, Guided Wave Testing of Containment Structures, Materials Evaluation, 59, pp.783-787.

Google Scholar

[22] Na, W. -B., Kundu, T., Ehsani, M.R., 2003, A Comparison of Steel/Concrete and Glass Fiber Reinforced Polymers/Concrete Interface Testing by Guided Waves, Materials Evaluation, 61, pp.155-161.

Google Scholar

[23] Prasad, S.M., Jagannathan, R., Balasubramaniam, K., Krishnamurthy, C.V., Structural Helath Monitoring of Anisotropic Layered Composite Plates Using Guided Ultrasonic Lamb Wave Data, Presented at QNDE 2003, Green Bay, WI.

DOI: 10.1063/1.1711787

Google Scholar

[24] Hay, T.R., Rose, J.L., 2003, Fouling Detection in the Food Industry using Ultrasonic Guided Waves, Food Control, 14, pp.481-488.

DOI: 10.1016/s0956-7135(02)00107-x

Google Scholar

[25] Costly R.D., Ingram, M., Simpson, J., Shah, V.V., and Balasubramaniam, K., Torsional waveguide sensor for molten materials, Review of Progress in Quanitative Nondestructive Evaluation, eds. D.O. Thompson and D. Chimenti, Vol. 17, pp.859-860, (1998).

DOI: 10.1007/978-1-4615-5339-7_111

Google Scholar

[26] Owens, S.E., Hauck, E.T., Rose, J.L., 2004, A Novel Couplant Free Mediator Ultrasonic Rayleigh Wave Technique for Detecting Surface Cracks in Green Parts, to be presented at the SAE 2004 World Congress, March 8-11, 2004, Detroit, MI.

DOI: 10.4271/2004-01-0493

Google Scholar

[27] Balasubramaniam, K., Rose, J.L., 1991, Physically Based Dispersion Curve Feature Analysis in the NDE of Composites, Research in Nondestructive Evaluation, 3, pp.41-67.

DOI: 10.1080/09349849109409501

Google Scholar

[28] Cawley, P., Lowe, M.J.S., Alleyne, D.N., Pavlakovic, B., Wilcox, P., 2003, Practical Long Range Guided Wave Testing: Applications to Pipes and Rail, Materials Evaluation, 61, pp.66-74.

DOI: 10.1784/insi.45.6.413.52892

Google Scholar

[29] Rose, J.L., Avioli, M.J., Elastic Wave Analysis for Broken Rail Detection, ASNT Ninth Annual Research Symposium, Birmingham, AL, March 27-31, 2000. Title of Publication (to be inserted by the publisher).

Google Scholar

[30] Hayashi, T., Song, W-J, Rose, J.L., 2003, Guided wave dispersion curves for a bar with an arbitrary cross-section, a rod and rail example, Ultrasonics, 41, pp.175-183.

DOI: 10.1016/s0041-624x(03)00097-0

Google Scholar

[31] Alleyne, D.N., Cawley, P., 2003, Long Range Propagation of Lamb Waves in Chemical Plant Pipework, Materials Evaluation, 55, pp.504-508.

Google Scholar

[32] Qu, J., Jacobs, L.J., 2003, Guided Circumferential Waves and Their Applications in Characterizing Cracks in Annular Components, Materials Evaluation, 61, pp.85-93.

Google Scholar

[33] Kwun, H., Kim, S.Y., Light, G.M., 2003, The Magnetostrictive Sensor Technology for Long Range Guided Wave Testing and Monitoring of Structures, Materials Evaluation, 61, pp.80-84.

Google Scholar

[34] Rose, J.L., 2002, Guided Wave Ultrasonic Pipe Inspection-The Next Generation, 8 th European Conference on Non-Destructive Testing, Barcelona, Spain, June 17-21.

Google Scholar

[35] Li, Jian, Rose, J.L., 2002, Angular-Profile Tuning of Guided Waves in Hollow Cylinders Using a Circumferential Phased Array, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 49, pp.1720-1729.

DOI: 10.1109/tuffc.2002.1159849

Google Scholar

[36] Rose, J.L., Mudge, P.J., 2002, Flexural Mode Focusing in Pipe, 8 th European Conference on Non-Destructive Testing, Barcelona, Spain, June 17-21.

Google Scholar

[37] Barshinger, J., Rose, J.L., Avioli, M.J., 2002, Guided Wave Resonance Tuning for Pipe Inspection, Transactions of the ASME, Journal of Pressure Vessel Technology, 124, pp.303-310.

DOI: 10.1115/1.1491580

Google Scholar

[38] Rose, J.L., Sun, Z., Mudge, P.J., Avioli, M.J., 2003, Guided Wave Flexural Mode Tuning and Focusing for Pipe Inspection, Materials Evaluation, 61, pp.162-167.

Google Scholar

[39] Zhao, X., Rose, J.L., 2003, Boundary Element Modeling for Defect Characterization Potential in a Wave Guide, " Int, l. Journal of Solids & Structures, 40, pp.2645-2658.

DOI: 10.1016/s0020-7683(03)00097-0

Google Scholar

[40] Lowe, M.J.S., Cawley, P., Kao, J. -Y., Diligent, O., 2002, The Low Frequency Reflection Characteristics of the Fundamental Antisymmetric Lamb Wave a0 from a Rectangular Notch in a Plate, JASA, 112, pp.2612-2622.

DOI: 10.1121/1.1512702

Google Scholar