[1]
|
R. Wilson, “Metallurgy and Heat Treatment of Tool Steels,” McGraw-Hill Book Company Limited, London, UK, 1975.
|
[2]
|
D. N. Collins, “Deep Cryogenic Treatment of Tool Steels: A Review,” Heat Treatment of Metals, No. 2, 1996, pp. 40-42.
|
[3]
|
A. Molinari, M. Pellizzari, S. Gialanella, G. Straffelini and K. H. Stiasny, “Effect of Deep Cryogenic Treatment on the Mechanical Properties of Tool Steels,” Journal of Materials Processing Technology, Vol. 118, No. 1, 2001, pp. 350-355.
|
[4]
|
Y. Lakhtin, “Engineering Physical Metallurgy,” Mir Publishers, Moscow, 1971.
|
[5]
|
C. T. Kwok, et al., “Microstructural and Corrosion Characteristics of Laser Surface-Melted Plastics Mold Steels,” Materials Science and Engineering: A, Vol. 357, No. 1-2, 2003, pp. 94-103. doi:10.1016/S0921-5093(03)00228-4
|
[6]
|
H. J. Shina, et al., “Microstructural and Hardness Investigation of Hot-Work Tool Steels by Laser Surface Treatment,” Journal of Materials Processing Technology, Vol. 201, No. 1-3, 2008, pp. 342-347.
doi:10.1016/j.jmatprotec.2007.11.232
|
[7]
|
K. Obergfell, V. Schulze and O. Vohringer, “Classification of Microstructural Changes in Laser Hardened Steel Surfaces,” Materials Science and Engineering: A, Vol. 355, No. 1-2, 2003. pp. 348-356.
doi:10.1016/S0921-5093(03)00099-6
|
[8]
|
H. Pantsar, et al., “Effect of Processing Parameters on the Microstructure and Hardness of Laser Transformation Hardened Tool Steel,” Proceedings of the 23rd International Congress on Applications of Laser and Electro-Optics (ICALEO 2004), San Francisco, California, USA, 4-7 October 2004, pp. 565-573.
|
[9]
|
G. H. Shehata, “Development of Hard Cutting Tools by
Laser Processing,” Ph.D. Dissertation, Helwan University,Cairo, Egypt, 1992.
|
[10]
|
M. S. Elnewishy, “Study on Laser Surface Treatment of Different Tool Steels,” M.Sc. Dissertation, Cairo University,Egypt, 2006.
|
[11]
|
N. Cheung, et al., “Mathematical Modeling and Experimental Analysis of the Hardened Zone in Laser Treatment of AISI 1045 Steel,” Materials Research, Vol. 7, No. 2, 2004, p. 349. doi:10.1590/S1516-14392004000200022
|
[12]
|
M. J. Tobar, C. álvarez, J. M. Amado, A. Ramil, E. Saavedra and A. Yáñez, “Laser Transformation Hardening of a Tool Steels: Simulation-Based Parameter Optimization and Experimental Results,” Surface and Coatings Technology, Vol. 200, No. 22-23, 2006, pp. 6362-6367. doi:10.1016/j.surfcoat.2005.11.067
|
[13]
|
R. Komanduri and Z. B. Hou, “Thermal Analysis of Laser Surface Transformation Hardening—Optimization of Process Parameters,” International Journal of Machine Tools and Manufacture, Vol. 44, No. 9, 2004, pp. 991-1008.
|
[14]
|
R. Patwa and Y. C. Shin, “Predictive Modeling of Laser Hardening of AISI51 50H Steels,” International Journal of Machine Tools and Manufacture, Vol. 47, No. 2, 2007, pp. 307-320. doi:10.1016/j.ijmachtools.2006.03.016
|
[15]
|
B. Yilbas, et al., “Laser Melting of Carbide Tool Surface: Model and Experimental Studies,” Applied Surface Science, Vol. 255, No. 23, 2009, pp. 9396-9403.
doi:10.1016/j.apsusc.2009.07.042
|
[16]
|
M. Ashby and K. Easterling, “A First Report on Diagrams for Grain Growth in Welds,” Acta Metallurgica, Vol. 30, No. 11, 1982, pp. 1969-1978.
doi:10.1016/0001-6160(82)90100-6
|
[17]
|
J. Ion, K. Easterling and M. Ashby, “A Second Report on Diagrams of Microstructure and Hardness for Heat-Affected Zones in Welds,” Acta Metallurgica, Vol. 32, No. 11, 1984, pp. 1949-1955, 1957-1962.
doi:10.1016/0001-6160(84)90176-7
|
[18]
|
S. Kou, “Heat Flow in Welding, Welding Metallurgy,” Wiley-Interscience, Hoboken, 2003.
|
[19]
|
J. Selvan, K. Subramanian and A. Nath, “Effect of Laser Surface Hardening on EN18 (AISI 5135) Steel,” Journal of Materials Processing Technology, Vol. 91, No. 1-3, 1999, pp. 29-36. doi:10.1016/S0924-0136(98)00430-0
|
[20]
|
K. Poorhaydari, B. Patchett and D. Ivey, “Estimation of Cooling Rate in the Welding of Plates with Intermediate Thickness,” Welding Journal, Vol. 84, No. 10, 2005, pp. 149s-155s.
|
[21]
|
“Design Expert Software, Version 6.0.5,” Serial No. W6XY2291. www.statease.com
|